Incoloy 800 825 840 woven wire mesh 30 wire mesh screen stocked
Production Introduction
Inconel Mesh is made of Inconel alloys for use in the moderate to
severely corrosive conditions at high temperatures. We produce
Inconel mesh in the following grades:
Inconel Mesh has excellent resistance to carburization, pitting and
crevice corrosion, stress corrosion cracking and oxidation. It is
resistant to a wide range of corrosive media such as organic,
inorganic compounds, acids and alkali. It possesses high
temperature mechanical strength, creeping resistance and long
service life.
Material details
UNS N08811
Incoloy 800 is a nickel – iron – chromium alloy with good strength
and excellent resistance to oxidation and carburization in high
temperature atmospheres up to 1100 degrees F. It also resists
corrosion in many aqueous environments. The low carbon content
helps prevent sensitization and consequent intergranular corrosion
of weld heat-affected zones. Used for flue-gas scrubbers and for
handling phosphoric and sulfuric acids.
Incoloy 800 Fact Sheet
Composition [Ni 32.5%, Cr 21.0%, C .10 Max, Fe Balance]
Specifications ASTM B408
Density 0.288 lbs/in³
Tensile Strength 110 Kpsi*
Elongation 30%*
Melt 2500° F
Max. Operating Temperature 1900° F
USN N08810 & UNS N08811
The Incoloy 800H and 800HT nickel – iron – chromium alloys are the
same basic alloys as Incoloy 800 but with significantly higher
creep-rupture strength. This is achieved by close control of
carbon, aluminum and titanium contents in conjunction with a
high-temperature anneal. These alloys are used in chemical and
petrochemical processing, in power plants, industrial furnaces and
heat treating equipment.
Incoloy 800H/HT Fact Sheet
Composition [Fe 39.5% approx., Ni 30-35%, Cr 19-23%, C 0.06-0.1%]
Specifications ASTM B408
Density 0.287 lbs/in³
Tensile Strength 110 Kpsi*
Elongation 32%*
Melt 2500° F
Max. Operating Temperature 1900° F
UNS N08825
This is a nickel – iron – chromium alloy with additions of
molybdenum and copper. It has excellent resistance to both reducing
and oxidizing acids, to stress cracking, and to localized attack
such as pitting and crevice corrosion. Incoloy 825 is especially
resistant to sulfuric and phosphoric acids. Often used in chemical
processing, pollution-control equipment, oil and gas well piping,
nuclear processing, acid production and pickling equipment.
Incoloy 825 Fact Sheet
Composition [Ni 38-46%, Cr 19.5-23.5%, Fe 22% min, Mo 2.5-3.5%, Cu
1.5-3%]
Specifications ASTM B425
Density 0.294 lbs/in³
Tensile Strength 115 Kpsi*
Elongation 30%*
Melt 2525° F
Max. Operating Temperature 1900-2000° F
Mesh size of the Inconel Mesh
Main Specification of Hastelloy Wire Mesh (Special Size can be customized): Mesh count | Wire diameter(mm) | Aperture(mm) | Max width(m) | 10 | 0.60 | 1.94 | 1.60 | 20 | 0.40 | 0.87 | 1.60 | 30 | 0.30 | 0.55 | 1.60 | 40 | 0.23 | 0.40 | 1.60 | 50 | 0.20 | 0.31 | 1.60 | 60 | 0.15 | 0.27 | 1.60 | 70 | 0.12 | 0.24 | 1.60 | 80 | 0.13 | 0.19 | 1.60 | 90 | 0.12 | 0.16 | 1.60 | 100 | 0.10 | 0.15 | 1.60 | 120 | 0.09 | 0.12 | 1.60 | 150 | 0.063 | 0.11 | 1.60 | 180 | 0.053 | 0.01 | 1.60 | 200 | 0.053 | 0.07 | 1.60 |
|
The service we offer
Goods pics
Thanks for your kind attention, any need, pls feel free to contact
with me !
